steel support

Adjustable steel support is a cost-effective support equipment suitable for lightweight construction, widely used in small buildings, temporary construction, home decoration and other scenarios. This product uses lighter pipes to protect the foundation bearing capacity while reducing costs, making it suitable for construction projects with limited budgets

II. Product Structure and Material

Lightweight Steel Pipe: Q235 carbon steel is used, with an inner pipe wall thickness of 2.0mm and an outer pipe wall thickness of 2.5mm, to protect the basic support capacity.

Easy to adjust nut: using ordinary cast iron or carbon steel nuts, easy to manually adjust

Standard base plate: The thickness of the base plate is 3mm, suitable for the support requirements of lightweight buildings

Surface treatment: spray painting or galvanizing to provide basic rust prevention ability

III. Product Advantages

Economical: Compared to heavy-duty steel supports, the cost is relatively low, making it suitable for construction projects with limited budgets.

Lightweight and easy to transport: Overall lightweight, easy to install and disassemble by a single person, improving construction efficiency

Suitable for various scenarios: can be used for small building support, decoration support, agricultural buildings, etc

Reusable: Although the bearing capacity is limited, it can be used multiple times within a reasonable range, with good cost-effectiveness.

Scope of Application

Small building construction: Suitable for low rise buildings, garages, warehouses and other small construction projects.

Home decoration: It can be used for ceiling support, wall reinforcement, and other purposes in home decoration construction

Agricultural buildings: used for supporting greenhouses, farmhouses, etc

Temporary construction support: can be used as a temporary support structure for exhibitions and event venues

Fifth, Product Parameters (Customizable)

Height Range: 1.2m-3.5m

Inner Pipe Diameter: 38mm-50mm

Outer Pipe Diameter: 48mm-60mm

Wall Thickness: 2.0mm-2.5mm

Large Bearing Capacity: 10kN-20kN

Surface Treatment: Spray Painting, Galvanizing

Sixth, Usage

Check Product Integrity: Confirm that the steel support has no cracks or deformations.

Adjust height: Adjust the nut according to construction needs and fix the height

Fixed base: Place it on a flat surface as much as possible to confirm stability

Stress inspection: It can be used directly during light load construction. If it needs to bear a large weight, it is recommended to add lateral support

7. Precautions: Avoid overloading to prevent deformation or support failure

Avoid humid environments when storing to reduce the impact of rust

Confirm that the fixing nut is securely locked during installation to prevent height sliding